α钛富氧层增厚动力学模型

为了实现在工业化生产中对α钛富氧层厚度预测和控制,通过实验研究α钛富氧层在高温空气环境中的形成及增厚过程,讨论热处理温度和时间的影响作用,建立高温(750~850℃)空气环境下关于温度、时间的富氧层增厚动力学模型。结果表明:当恒温热处理温度为750~850℃时,α钛富氧层厚度x与保温时间t0.5呈正比例关系,且升高热处理温度可显著提高富氧层增厚速度。在此温度范围内,氧原子的扩散激活能约为203473 J/mol,计算曲线与实验数据吻合性较好。结合文献中已有的扩散系数方程和实验测得的富氧层厚度数据,推导得到5个富氧层增厚动力学方程,其中3个方程的计算曲线与实验数据吻合性较好,可为实际生产中预估富氧层厚度提供理论支持。     

Microstructure and some properties of powder-pack borided Ti–5Mo–5V–8Cr–3Al alloy with special attention to the microstructure at the interface TiB/substrate

The borided layer was prepared on the surface of the Ti–5Mo–5V–8Cr–3Al alloy by powder-pack boriding at 1000°C-10h. SEM, EPMA and TEM were used to investigate the effects of alloying elements (Al, V, Mo and Cr) on the growth of TiB whiskers in the borided Ti–5Mo–5V–8Cr–3Al alloy. Wear properties of borided Ti–5Mo–5V–8Cr–3Al alloy were investigated using dry reciprocating friction tests. SEM results show that the thickness of boride layer in Ti–5Mo–5V–8Cr–3Al alloy is thinner than that in the Cp-Ti. This is attributed to the enrichment of alloying elements especially V in TiB/substrate by TEM, which hinders the diffusion of B atoms, thus resulting in the short and thick TiB whiskers in Ti–5Mo–5V–8Cr–3Al alloy. Borided Ti–5Mo–5V–8Cr–3Al alloy has the better wear resistance than as-received alloy.     

退火温度对HA/Ti-24Nb-4Zr复合材料组织与性能的影响

利用放电等离子烧结(SPS)技术制备了HA/Ti-24Nb-4Zr生物复合材料,研究了不同退火温度对复合材料显微组织和力学性能(抗压强度、屈服强度、屈强比、压缩弹性模量)的影响。结果表明,烧结态复合材料主要由β-Ti相、少量初生α-Ti相及HA相组成;随着退火温度的升高,复合材料基体中β-Ti相含量增多且晶粒逐渐长大,针状次生α-Ti相在晶界处和晶内不断析出,HA相结构和含量变化不大;与烧结态相比,不同退火温度处理后的复合材料强度和弹性模量先略微上升后下降,而塑韧性呈不断提高趋势;复合材料在850 ℃退火处理后,抗压强度、屈服强度、屈强比和压缩弹性模量值分别为1507 MPa、1270 MPa、0.84和42 GPa,塑韧性得到明显改善,作为生物医用植入材料具有潜在的应用前景。     

An easy and scalable approach to synthesize three-dimensional sandwich-like Si/Polyaniline/Graphene nanoarchitecture anode for lithium ion batteries

A new three-dimensional (3D) sandwich-like Si/Polyaniline/Graphene nanoarchitecture anode for lithium ion batteries (LIBs) is successfully fabricated through an easy approach. In this nanoarchitecture, the in-situ polymerized electronic conductive polyaniline (PAni) hydrogel, acting as “glue”, agglutinates tightly to both the silicon nanoparticles (SiNPs) and graphene sheets, forming efficient conductive networks with high elastic modulus and high tensile strength. This mechanically robust nanoarchitecture can endure the great volume change of silicon and retain structural stability during Li-ion insertion/extraction. The electrodes consisting of this 3D sandwich-like Si/Polyaniline/Graphene nanoarchitecture reveal excellent electrochemical performance. The progress made in this work provides an easy and scalable route for preparing Si-based anode materials with high performance for advanced LIBs.     

应用M-MIVM预测含钛渣系组元活度

 在钢铁冶炼过程中,随着护炉钛材料和含钛铁矿石的应用,大量的含钛炉渣被生产出来。由于缺少多元含钛渣系的热力学数据,限制了钛资源综合利用技术的深入发展。因此,应用改进的分子相互作用体积模型(M-MIVM(FII)),预测了基础渣系Al₂O₃-CaO-SiO₂、FeO-MnO-SiO₂和含钛渣系FeO-MnO-TiO₂、FeO-SiO₂-TiO₂、MnO-SiO₂-TiO₂、Al₂O₃-CaO-FeO-TiO₂中各组元活度,并与试验值比较。结果表明,M-MIVM(FII)的预测值与试验值符合较好,6个体系总的平均相对误差为11%,该精度处于Turkdogan提出的30%以内的试验误差范围; M-MIVM(FII)在参数拟合与活度预测能力方面均优于MIVM,该模型对多元含钛熔渣体系组元活度具有更好的预测效果。在此基础上,应用M-MIVM(FII)预测Al₂O₃-CaO-SiO₂-TiO₂熔体中TiO₂活度,并分析其影响因素。结果表明,TiO₂活度预测值与试验值吻合良好,且随炉渣碱度、Al₂O₃含量的增加而降低,该规律与试验规律相一致。M-MIVM(FII)仅通过拟合子二元系活度或者直接由无限稀活度系数就能够预测多元熔体的热力学性质。     

帕金森氏病关联miRNAs的功能和调控

帕金森病（Parkinson's disease, PD）是一种老年期常见的神经系统退行性疾病，致病过程复杂，其发病机制尚未明确，目前普遍认为帕金森病的发生与环境、遗传和年龄等多个因素有关。microRNAs（miRNAs）是一种内源性的小分子非编码RNAs，在转录后水平调控人类基因组中约1/3的基因。大量研究表明，帕金森病与miRNAs存在密切关联，在PD的发生发展、诊断甚至治疗过程中起到重要作用。本综述讨论了最近研究报道的和帕金森病相关的miRNAs，并分析了miRNAs的特异性表达在帕金森病的致病机制和诊断中发挥的作用。     

Optical studies of Y_3(Al,Ga)_5O_(12):Ce~(3+),Cr~(3+),Nd~(3+) nano-phosphors obtained by the Pechini method

The Y3(AI,Ga)_5O_(12):Ce~(3+),Cr~(3+),Nd~(3+)(YAGG) nano-phosphors with homogeneous particle-size distribution,low aggregation and average crystalline size of about 65 nm were obtained using a modified Pechini method.Only slight aggregation of the crystallites occurs after post-annealing at 1100℃.The intense Ce~(3+)bands in the excitation spectra of the Ce~(3+),Cr~(3+),Nd~(3+)co-doped materials monitoring the Cr~(3+) emission at 690 nm indicate energy transfer from Ce~(3+) to Cr~(3+).Weak Nd~(3+) lines are observed,as well.In addition,the emission of Nd~(3+)at 1060 nm with excitation of Ce~(3+) and Cr~(3+) confirms the Ce~(3+)/Cr~(3+)to Nd~(3+)energy transfer.The short average luminescence decay times for the Ce~(3+) emission indicate the Ce~(3+)/Cr~(3+)to Nd~(3+)energy transfer.Eventually,the Y_3(AI,Ga)_5O_(12):Ce~(3+),Cr~(3+),Nd~(3+) nano-phosphors exhibit persistent luminescence originating from the 4f~3→4f~3 transitions of Nd~(3+) which matches well to the first biological window to be used in bioimaging applications.     

高应变率下红砂岩"冻伤效应"

对低温冻结红砂岩进行动态冲击实验，研究高应变率下红砂岩动态力学特性的温度效应，运用损伤理论和能量理论，分析不同负温对红砂岩强度、损伤变量及能量耗散的影响，结合断口形貌分析，探究红砂岩在较低负温下动态力学强度出现劣化的原因.研究表明:较低的负温(-30℃后)会使红砂岩出现"冻伤"，导致高应变率下岩石动态力学强度的急剧降低，宏观上则容易出现动力扰动下的瞬时工程灾变.根据断口形貌分析，较低的负温会导致红砂岩内部组成物质间界面处生成大量裂纹，这些裂纹尖端塑性变形能力差，在高应变率加载下极易失稳扩展发生低应力脆性破坏，而胶结物由于组成矿物成分复杂更易受负温影响，因此在动荷载和负温双重作用下往往是胶结物处先产生破坏，进而引起红砂岩整体的破裂.      

The effect of the exposed crystal plane on the antioxidant activity of nanoceria

Previous reports have noted that exposed crystal planes could affect the antioxidant activity of nanocerias, although the synthesized nanocerias used in those studies had different exposed crystal planes, as well as different sizes and morphologies. In order to better understand the effect of the crystal planes on the antioxidant activity of the materials, two types of nanocerias with similar morphology and size distribution but different crystal planes were synthesized using the hydrothermal method (CeO₂–H) and the ultrasonic template method (CeO₂–U). The antioxidant activities of the nanocerias were further explored within different ·OH concentrations in the reaction system. The experimental results showed that there is an obvious difference in the antioxidant activity of the two types of nanocerias in the lower free radical concentration system due to the effects of exposed crystal planes. CeO₂–U, with more active crystal planes (100), had stronger antioxidant activity. However, with the increase in the ·OH concentration in the reaction system, the difference in the antioxidant activity of the two nanocerias decreased. This research will increase our understanding of the antioxidant activity of the exposed crystal planes on nanocerias.     

云南镇源难处理金精矿工艺矿物学研究

利用X射线衍射、X射线荧光光谱（XRF）、X射线能谱分析（EDX）和矿物解离分析（MLA）等检测手段对云南镇源难处理金精矿的化学组成、矿物组成、硫化物特征以及金的分布情况进行了详细的工艺矿物学研究。结果显示：该金矿以硫化矿、碳酸盐和硅酸盐类矿物为主，含有3.18%的有机碳和2.37%的无机碳。通过金的诊断浸出发现96.16%的金被硫化物包裹，少量金以单体形式存在。通过对主要载金矿物黄铁矿、辉锑矿和毒砂的粒度、包裹及裸露情况进行分析，得出大部分硫化矿以解离单体的形式存在，少部分与其他矿物共生。根据MLA测试及金的诊断浸出，认为大部分金被硫化矿完全包裹，处理该矿石时应先进行硫化物包裹层的氧化处理，再进行金矿的浸出。